CM600 600 Amps AC/DC Current Clamp Meter

With its auto-range and high sensitivity, the CM600 current clamp meter allows the measurement of AC/DC currents with a resolution down to 0.1 A, and up to a maximum of  600A, making it ideal for testing all kinds of loads such as found in: electric motors, fuel pumps, charging systems, starter currents, alternators, etc.

The CM600 features a small and narrow jaw, which can accept cables up to 1” (25.4mm) in diameter and be used in confined spaces, wire bundles, and small gauge wires. Other features include up to 600 Volts AC/DC voltage and resistance measurement functions, continuity test (with buzzer), and display hold and peak detector functions.

CM600 Features

• Clamp opens up to 1 inch (25.4 mm)

• One rotary switch operation.

• Large 4 digit LCD display.

• AC/DC Voltage measurement up to 600 Volt.

• AC/DC current measurement  up to 600 A.

• Relative measurement

• One touch auto zero.

• Peak Hold Function

• Data Hold Function

• Resistance measurement.

• 2 readings per second sampling

• Continuity check with audible indicator.

• Protective hand guard.

• Low battery indicator.

• Auto power off.

• 50 hrs in use battery life.

• Soft carrying deluxe pouch.

• Test leads and batteries included.

For use in:

• Electronic and electrical circuits

• Automobiles

• Trucks

• Trailers

• Boats

• RVs

• All 0 to 600 Volt AC/ DC powered circuits

Technical Specifications

• Display:

  • 4 Digit LCD (Max. reading 600.0)

  • 0.393"(10 mm) Digits

  • Units indicator

  • Relative measure indicator

  • Display data hold indicator

  • Peak hold indicator

  • VDC/VAC indicator

  • Continuity indicator

  • Automatic over-range indication

  • Automatic( - ) negative polarity indicator

  • One touch button auto zeroing

  • Auto power off

  • Low battery indicator

• Power source: Two (2) Standard AAA 1.5 Volt alkaline battery type AAA UM4 or equivalent

• Test probes: One red and one black, 1000V/15A rated (IEC1010/EN61010 CAT II), 35½" long

• Physical dimensions:  7.44” (H) x 2.75” (W) x 1.33” (D) - 189mm (H) x 70 mm (W) x 34 mm  (D)

• Weight: Approximately 7.76 Oz ( 220 g) Including battery

Electrical Specifications

• DC Voltage: ± 1% ± 2 dgts.,  600 V ac/dc maximum, 660Vrms overload protection

• AC Voltage: ±1.5% ± 5 dgts., 50 to 500 Hz, 660 V ac/dc maximum, 660Vrms overload protection

• DC Current: ± 2.5 % ± 10 dgts., 600 Amp. maximum, 660Arms overload protection

• AC Current: ± 2 % ± 10 dgts., 600 Amp. maximum, 660Arms overload protection

• Resistance: ±1% ± 3 dgts., 660Vrms overload protection

• Continuity Test: Audible indicator (Buzzer) when circuit resistance is below 100 Ω, max. voltage test  < 3 Vdc.

Applications

• Measure currents in circuits like battery chargers, alternators, leakage currents, electrical loads, etc.

• Check grounds, Voltage drops and continuity across Connectors, Wires, Cables, Relays Contacts, Lamps, Switches, etc.

• Check components like Alternator, Diodes, Relays Coils, Condensers, Ignition Coils, Spark Plug Wires, Magnetic Pick-ups, Motors, Switches, Fuses, etc.

• An essential tool for all around troubleshooting of electrical and electronic circuit and systems.

Ergonomic Features:

• The new smaller jaws and ergonomic profile compared with other models makes handling and operation easier and more convenient

• Large easy to read 0.393" (10 mm) digits display

• Single knob selects functions

• Peak hold function

• Display data hold

• Rugged plastic enclosure

• Design allows comfortable handling

CM600 Includes:

• CM600

• Soft Pouch

• 2 x 35½" (0.9 m) Test probes

• 2 x 1.5 V AAA alkaline battery,

• User’s Manual

Home  |  Products  |  Int'l Distributors  |  USA Distributors   |  Warranty  |  Contact us