GTC_logoSCT8015 Manual Range Digital Multimeter
Home  |  Products  |  Int'l Distributors    |  USA Distributors  |  Warranty  |  Contact us

CT8015 Features

  • State of the Art ergonomic design and styling for easier handling and use

  • Full control manual range selection

  • Large 3½ digit LCD display

  • AC/DC Voltage measurement up to 600 Volt

  • DC Current measurement up to 10 A

  • Resistance measurement up to 2 MOhm

  • Transistor (hFE) and diode test

  • Continuity Test

  • Overload protection

  • Soft holster for instrument protection

  • Auto power off

Quick and simple to use

  • The smaller and ergonomic profile compared with previous models makes handling and operation easier and more convenient

  • Single knob selects function and range

  • Rugged plastic enclosure

  • Soft anti-slip rubber holster protects the instrument against impacts and chemicals

  • Large easy to read 1/2" (12.5 mm) digits display

  • Design allows comfortable hand holding or resting at  convenient places horizontally or at an angle by using the stand at the back of the holster

Technical Specifications

  • Display:

    • 3½ Digit LCD (Max reading 1999)

    • 1/2”(12.5 mm) Digits

    • High Voltage warning indicator

    • Automatic( - ) negative polarity indicator

    • Automatic Zeroing

    • Automatic over-range indication

    • Low battery indicator

  • Power source: Standard 9 Volt alkaline battery type NEDA 1604 IEC 6F 22

  • Test probes: One red and one black, 1000V/10A rated (IEC1010/EN61010 CAT II), 35½" long

  • Physical dimensions:  5.51” (H) x 2.75” (W) x 1.41” (D) (140 x 70 x 36 mm )

  • Weight: Approximately 12.34 Oz ( 350 g) Including battery

Electrical Specifications

  • DC Voltage: ±0.8% ± 1dgts., 1MOhm input impedance, 600 V ac/dc Overload protection

  • AC Voltage: ±1.5% ± 10 dgts., 450KOhm input impedance, 40 to 200 Hz, 600 V ac/dc Overload protection

  • Resistance: ±1.0% ± 3 dgts., 250 V ac/dc Overload protection

  • DC Current: ± 1.0 % ± 2 dgts., Internal 200mA/10A 250V fuse protection

  • Diode test: 1.4 ± 0.6 mA test current, 3.2 V max. test voltage

  • Continuity Test: Audible indicator (Buzzer) with circuit resistance is below 100 Ohm

  • Transistor Test: hFE value from 0 to 1000 of npn and pnp transistors

 

 CT8015
Parts and Accessories
Parts and accessories		 User Manual
User's Manual
(PDF 313K)		 Product Brochure
Brochure
(PDF 3.23M)
 

Applications

  • Measure output in sensors like Oxygen (O2), Coolant Temperature, Throttle Position (TPS), Manifold Air, Pressure (MAP), Manifold Air Flow (MAF), etc.

  • Check grounds, Voltage drops and continuity across Connectors, Wires, Cables, Relays Contacts, Lamps, Switches, etc.

  • Check components like Alternator, Diodes, Relays Coils, Condensers, Ignition Coils, Spark Plug Wires, Magnetic Pick-ups, Motors, Switches, Fuses, etc.

  • An essential tool for all around troubleshooting of electrical and electronic circuit and systems.

Ergonomic Features:

  • Automobiles

  • Trucks

  • Trailers

  • Boats

  • RVs

  • 0 to 600 Volt AC/ DC powered circuits

CT8015 Includes:

  • CT8015

  • Protective holster

  • Soft pouch for carrying and storage

  • Two test probes, one red and one black 35½" (0.9 m) long each

  • 9 Volt Alkaline

  • User's Manual

Home  |  Products  |  Int'l Distributors  |  USA Distributors  |  Warranty  |  Contact us