GTC_logoSCT8017  Autorange Digital Multimeter

Home  |  Products  |  Int'l Distributors  |  USA Distributors  |  Warranty  |  Contact us

CT8017 Features

  • State of the Art ergonomic design and styling for easier handling and use

  • Full Auto Ranging range selection

  • Manual range selection function

  • Large 3¾ digit LCD display with analog bar graph

  • AC/DC Voltage measurement up to 600 Volt

  • Manual or automatic VDC/VAC selection

  • DC Current measurement up to 10 A

  • Resistance measurement up to 32 MOhm

  • Display data hold

  • Continuity Test

  • Diode test

  • Overload protection

  • Soft holster for instrument protection

  • Auto power off

Quick and simple to use

  • The new smaller and ergonomic profile compared with previous models makes handling and operation easier and more convenient

  • Large easy to read 7/16" (11 mm) digits display

  • Analog bar graph display

  • Single knob selects function

  • Range hold function

  • Display data hold

  • Rugged plastic enclosure

  • Soft anti-slip rubber holster protects the instrument against impacts and chemicals

  • Design allows comfortable hand holding or resting at  convenient places horizontally or at an angle by using the stand at the back of the holster

Technical Specifications

  • Display:

    • 3¾ Digit LCD (Max reading 3999)

    • 7/16"(11 mm) Digits

    • 32 segments bar graph display

    • Display data hold indicator

    • Manual range indicator

    • VDC/VAC indicator

    • Automatic over-range indication

    • Automatic( - ) negative polarity indicator

    • Automatic Zeroing

    • Low battery indicator

  • Power source: Two (2) Standard AA 1.5 Volt alkaline battery type AA UM3 or equivalent

  • Test probes: One red and one black, 1000V/15A rated (IEC1010/EN61010 CAT II), 35½" long

  • Physical dimensions:  5.51” (H) x 2.75” (W) x 1.41” (D) - 140 mm (H) x 70 mm (W) x 36 mm  (D)

  • Weight: Approximately 12.34 Oz ( 350 g) Including battery

Electrical Specifications

  • DC Voltage: ±0.8% ± 2 dgts., 2MOhm input impedance, 600 V ac/dc Overload protection

  • AC Voltage: ±1.2% ± 5 dgts., 2MOhm input impedance, 50 to 200 Hz, 600 V ac/dc Overload protection

  • DC Current: ± 1.5 % ± 2 dgts., Internal 200mA/10A   250V fuse protection

  • AC Current: ± 1.5 % ± 5 dgts., Internal 200mA/10A   250V fuse protection

  • Resistance: ±1.2% ± 3 dgts., 250 V ac/dc Overload protection

  • Diode test: 1.0 ± 0.6 mA test current, 3.2 V max. test voltage

  • Continuity Test: Audible indicator

CT8017
Parts and Accessories
Parts and accessories
User Manual
User's Manual
(PDF 370K)
Product Brochure
Brochure
(PDF 3.23M)
 

Applications

  • Measure output in sensors like Oxygen (O2), Coolant Temperature, Throttle Position (TPS), Manifold Air, Pressure (MAP), Manifold Air Flow (MAF), etc.

  • Check grounds, Voltage drops and continuity across Connectors, Wires, Cables, Relays Contacts, Lamps, Switches, etc.

  • Check components like Alternator, Diodes, Relays Coils, Condensers, Ignition Coils, Spark Plug Wires, Magnetic Pick-ups, Motors, Switches, Fuses, etc.

  • An essential tool for all around troubleshooting of electrical and electronic circuit and systems

For Use in:

  • Automobiles

  • Trucks

  • Trailers

  • Boats

  • RVs

  • 0 to 600 Volt AC/ DC powered circuits.

CT8017 Includes:

  • CT8017

  • Probe protective cap

  • Alligator clip adaptor for test probe

  • 9 Volt alkaline battery

  • User’s Manual

Home  |  Products  |  Int'l Distributors  |  USA Distributors  |  Warranty  |  Contact us