GTC_logoSCT8030  Dual Display Professional Automotive Multimeter      

Home  |  Products  |  Int'l Distributors  |  USA Distributors  |  Warranty  |  Contact us

CT8030 Features

  • State of the Art ergonomic design and styling for easier handling and use

  • Full autorange features

  • Large selectable 4¾ or 3¾ digit main display

  • 4 digits secondary display 

  • 42 segments analog bargraph

  • DC Voltage measurement up to 1000 Volt

  • AC Voltage measurement up to 750 Volt

  • AC/DC Current measurement up to 10 A

  • Tachometer function with inductive pickup measures from 30 to 20000 rpm

  • Dwell measurement in degrees from 0 to 360º or duty cycle from 0 to 100%

  • Temperature measurement from -20ºC to 1000ºC or 0º to 1832ºF (selectable ºC or ºF)

  • Resistance measurement up to 40 MOhm

  • Frequency measurement from 10 to 20 KHz

  • Fuel Injection test measures pulse width from 0.05 to 250 mS, or duty cycle from 0 to 100%

  • Oxygen Sensor test function

  • Alternator test function

  • Fault Code Reader

  • DTC Decoder

  • Diode test

  • Continuity Test

  • Overload protection

  • Soft holster for instrument protection

  • Auto power off

Simple and easy to use

  • The more ergonomic profile compared with previous models makes handling and operation easier and more convenient

  • Single knob selects function and range

  • Rugged plastic enclosure

  • Soft anti-slip rubber holster protects the instrument against impacts and chemicals

  • Large easy to read 1/2" (12.5 mm) digits display

  • Design allows comfortable hand holding or resting at  convenient places horizontally or at an angle by using the stand at the back of the holster

Technical Specifications

  • Display:

    • 4¾ digits main display

    • 4 digits secondary display

    • 42 Segments analog bargraph (20 updates/Second)

    • Backlight

    • Automatic( - ) negative polarity indicator

    • Automatic Zeroing

    • Automatic over-range indication

    • Low battery indicator

  • Power Source: One standard 9 Volt alkaline battery type NEDA 1604 IEC 6F 22

  • Physical dimensions (including holster):  6.30” (H) x 3.22” (W) x 1.89” (D) - (160 x 82 x 48 mm)

  • Weight: Approximately 12.14 Oz ( 345 g) Including battery

Electrical Specifications

  • DC Voltage: 0 to ± 1000V,  ±0.3% ± 2 dgts., 10MΩ input impedance

  • AC Voltage: 0 to 750V, ±2.5% ± 5 dgts., 10MΩ input impedance, 50 to 500 Hz

  • DC Current: 0 to ± 10A, ± 0.8 % ± 4 dgts., 

  • AC Current: 0 to 10A, ± 0.8 % ± 4 dgts.

  • Resistance: 0 to 40 MΩ ± 0.8% ± 5 dgts., 

  • Frequency: 0 to 20 KHz, ± 0.01 % ± 2 dgts.

  • Tachometer: 30 to 20000 RPM, ± 2 RPM

  • Dwell: 0 to 360º, ± 1.2°/ krpm/cyl + 2d

  • Fuel Injector (pulse width): 0.05 to 250 mS, ± 0.05 mS +1d

  • Oxygen Test: Measures cross count up to 10/Second

  • Alternator Test: Measures output voltage ripple, beeps if ripple exceeds 0.45V

  • Fault code reader: Retrieves blink type fault codes

  • DTC Decoder: Retrieves Impulse Code Diagnostic Trouble Codes

  • Diode test: 2.4 ± 0.6 mA test current, 3.2 V max. test voltage

  • Continuity Test: Audible indicator (Buzzer) with circuit resistance is below 100 Ohm

  • Temperature: -20º to 1000°C or 0°F to 1832°F (±2% + 1 dgts.)

 		CT8030
Parts and Accessories
Parts and accessories		 User Manual
User's Manual
(PDF10M)		 Product Brochure
Brochure
(PDF 3.23M)
 

Applications:

  • Measure engine RPM, ignition dwell angle, and temperature of exhaust manifold, cooling system, air conditioning, heating system, catalytic converter, etc.

  • Measure output in sensors like Oxygen (O2), Coolant Temperature, Throttle Position (TPS), Manifold Air, Pressure (MAP), Manifold Air Flow (MAF), etc.

  • Check grounds, Voltage drops and continuity across Connectors, Wires, Cables, Relays Contacts, Lamps, Switches, etc.

  • Check components like Alternator, Diodes, Relays Coils, Condensers, Ignition Coils, Spark Plug Wires, Magnetic Pick-ups, Motors, Switches, Fuses, etc.

  • An essential tool for all around troubleshooting of electrical and electronic circuit and systems

For use in:

  • Automobiles

  • Trucks

  • Trailers

  • Boats

  • RVs

  • 0 to 600 Volt AC/ DC powered circuits.

CT8027 Includes:

  • CT8030

  • Protective holster

  • Hard padded case for carrying and storage

  • Two test probes, One red and one black, 1000V/10A rated (IEC1010/EN61010 CAT II), 35½" long

  • One K Type thermocouple probe for temperature measurements

  • Two alligator clip adaptors

  • Two DTC connector probes

  • Inductive Pickup for RPM measurements

  • 9 V alkaline battery

  • User’s Manual

Home  |  Products  |  Int'l Distributors  |  USA Distributors  |  Warranty  |  Contact us