|
FF300 Features
-
Operates on DC voltages from
6 to 36
volts.
-
Internally protected against power surges and overloads.
-
9" flexible probe allows reaching wires in congested places.
-
Transmitter and Receiver LEDs show open or short circuit conditions.
-
Variable audio/visual signal provides fast and intuitive feedback on the
circuit/wire proximity.
-
Adjustable sensitivity for all tracing situations.
-
No wire piercing required, non-contact technology!
-
Tracing of wires is made possible even inside bundles, conduits, behind
panels, under carpets, upholstery, etc.
-
Transmitter has auto polarity and leads with 5 amps
alligator clips.
Easy and flexible to use
-
It only requires connecting the
transmitter in series with the circuit or wire under test, (i.e.: in place of a blown
fuse, across a connector, in series with an open wire, a light bulb socket, etc.), and
scanning the circuit/wire with the tracers flexible probe to find the trouble spot.
-
This
professional tool will work on all kinds of circuits with voltages between 6 and
36 Volt DC, such as those found in automobiles, trucks, trailers,
tractors, boats, RVs, etc… With its wide working voltage range,
automatic open/short detection, flexible probe and adjustable
sensitivity, the FF300 Faultfinder enables you, to troubleshoot a complete
array of common problems, in a wide variety of vehicles.
-
Now with the FF300 you can locate short circuits,
broken wires, current leaks and perform wire tracing quickly and easily spending only a fraction
of the time and effort required when using conventional methods. In most cases, you will
even be able to locate the problem area without having to untie harnesses, open conduits
or remove panels.
Technical Specifications
FF300T (Transmitter)
-
Indicators: Green LED for power On and Open circuits. Red LED for
short circuits.
-
Power source: 9-volt alkaline battery. Duracell
type MN1604 (included)
-
Battery life: approx. 50 hrs.
-
Connector: Two 5 A alligator clamps
with auto polarity and 18” long cable.
-
Physical
dimensions:
4.375” (H) x 2.56” (W) x
0.937” (D) - (111 x 65 x 23 mm) - Excluding
cable and probes
-
Weight:
Approximately 5.6 Oz ( 156 g) Including battery
FF300R (Receiver)
-
Sensitivity: Three user
selectable sensitivity levels (low, medium and high).
-
Receiver probe: Flexible
9” gooseneck insulated steel probe.
-
Indicators:
Green LED indicator for power on and open circuits. Red LED indicator
for short circuits.
Variable flashing and modulated audible signal.
-
Power source: Standard
9-volt alkaline battery. Duracell type MN1604 (included)
-
Battery Life: approx. 50
hrs. Auto Power Off.
-
Physical
dimensions: 4.375” (H) x 2.56” (W) x
0.937” (D) - (111 x 65 x 23 mm) - Excluding antenna and probe
-
Weight:Approximately 5.2 Oz ( 145 g) Including battery
Electrical Specifications
-
Input Voltage range: 6 to 36 Volt DC.
-
Input DC Current: Unlimited (internally limited)
-
Voltage output: 5 Volt DC maximum
-
Current Output: 200 mA DCrms maximum
|

Discontinued Product - For replacement see
FF310 |