|
The FF310 - FaultFinder™ is a specially designed
tool for tracking and tracing short and open circuits, broken wires and
current leaks on any electrical circuit with voltages from 6 to 42 Volt
DC, and is used by technicians worldwide in an ample range of equipment
such as automobiles, truck trailers, tractors, farming equipment, boats,
forklifts, motorcycles, all-terrain and recreational vehicles, etc.
The 42V ready™ FF310’s wide working voltage range,
automatic short/open detection, adjustable sensitivity levels and
flexible antenna probe enables the technician to troubleshoot a complete
array of common electrical problems without having to untie wire
harnesses or remove body panels.
|
|
FF310 Features
-
42
V Ready:
for use
in the new generation of vehicles with mixed or single 42 Volt systems
-
Operates on DC voltages from
6 to 42
volts.
-
Internally protected against power surges and overloads.
-
8" flexible probe allows reaching wires in congested places.
-
Transmitter and Receiver LEDs show open or short circuit conditions.
-
Variable audio/visual signal provides fast and intuitive feedback on the
circuit/wire proximity.
-
Adjustable sensitivity for all tracing situations.
-
No wire piercing required, non-contact technology!
-
Tracing of wires is made possible even inside bundles, conduits, behind
panels, under carpets, upholstery, etc.
-
Transmitter has auto polarity and leads with 5 amps
alligator clips.
Easy and flexible to use
-
It only requires connecting the
transmitter in series with the circuit or wire under test, (i.e.: in place of a blown
fuse, across a connector, in series with an open wire, a light bulb socket, etc.), and
scanning the circuit/wire with the tracers flexible probe to find the trouble spot.
-
This
professional tool will work on all kinds of circuits with voltages between 6 and
42 Volt
DC, such as those found in automobiles, trucks, trailers, tractors, boats, RVs, etc
With its wide working voltage range, automatic open/short detection, flexible probe and
adjustable sensitivity, the FF310 Faultfinder enables you, to troubleshoot a complete
array of common problems, in a wide variety of vehicles.
-
Now with the FF310 you can locate short circuits,
broken wires, current leaks and perform wire tracing quickly and easily spending only a fraction
of the time and effort required when using conventional methods. In most cases, you will
even be able to locate the problem area without having to untie harnesses, open conduits
or remove panels.
Technical Specifications
FF310T (Transmitter)
-
Indicators: Green LED for power On and Open circuits. Red LED for
short circuits.
-
Power source: 9-volt alkaline battery. Duracell
type MN1604 (included)
-
Battery life: approx. 25 hrs.
-
Connector: Two 5 A alligator clamps
with auto polarity and 18” long cable.
-
Physical
dimensions: 6” (H) x 1.75” (W) x 0.875”
(D) - (152.5 x 44.5 x 23 mm) - Excluding probes
-
Weight:
Approximately 5.2 Oz ( 145 g) Including battery
FF310R (Receiver)
-
Sensitivity: Three user
selectable sensitivity levels (low, medium and high).
-
Receiver probe: Flexible
8” gooseneck insulated steel probe.
-
Indicators:
Green LED indicator for power on and open circuits. Red LED indicator
for short circuits.
Variable flashing and modulated audible signal.
-
Power source: Standard
9-volt alkaline battery. Duracell type MN1604 (included)
-
Battery Life: approx. 25
hrs. Auto Power Off.
-
Physical
dimensions: 6.125” (H) x 1.75” (W) x
0.875” (D) - (155 x 44.5 x 23 mm) - Excluding probe
-
Weight:
Approximately 5.2 Oz ( 145 g) Including battery
Electrical Specifications
-
Input Voltage range:
6 to 42 Volt DC.
-
Input DC Current:
Unlimited (internally limited)
-
Voltage output:
5 Volt DC maximum
-
Current Output: 100
mA DC rms maximum
|
 |