TA100 Smartach+: Wireless Ignition Analyzer and Tachometer

  TA100 Brief description                                                                                                                                 

The TA100’s unique and proprietary technology allows the user to perform quick and reliable diagnostics of non-starts, misfires, fouled up or damaged spark plugs and/or spark plug wires, by comparing digital read-outs of the spark plug voltage between cylinders on engines using conventional distributor/ignition coil, DIS (Distributor-less) or waste spark and magneto technologies.

Simple to use, the TA100 requires no special adapters, cables or a scope and is equipped with a large digital display that shows spark plug voltage, RPM, as well as Min/Max readings in real time.

TA100 Features

Secondary ignition analyzer

• Measures spark plug wire voltage from 0 to 50000 Volt

• Special antenna sensor allows quick hook-up to spark plug and ignition coil wires

• No ground wire connections required, for fast troubleshooting

• Multiple diagnostic applications are described in comprehensive User's Handbook (Included)

Tachometer function

• For 1 to 12 cylinders and 2, 4 cycle and DIS engines

• Measures from 200 to 20000 RPM on a 4-1/2 digits LCD display

• Advanced microcontroller technology yields 0.05 % accuracy

• No sighting of rotating parts or hook-up required.

• Works on DIS, Conventional, Magneto and most spark ignition system.

Simple and easy to use

• Secondary Ignition Voltage Tester: Place the antenna's capacitive sensor on a spark plug wire or coil. Peak voltage of the ignition pulse in kilovolts is displayed.

• Adjustable KV scale: allows the user to trim the KV reading scale, to match other instrument or a know value.

• Tachometer: Set the number of cylinders and cycles, either place the capacitive sensor on a spark plug wire, or hold the instrument's antenna near the ignition system. RPM is displayed.

• Minimum and Maximum display: Two secondary displays show in real time the maximum and minimum readings.

Technical Specifications

• Display: Large 4-1/2 Digits LCD + 2 x 3-1/2 Digits secondary displays (for Maximum, Minimum and other functions)

• Tachometer Range:  200 to 19999 RPM

• # of Cylinders: 1,2,3,4,5,6,8,10 and 12

• Cycles: 2 and 4 Cycles, and DIS

• Accuracy:  ± 0.1% + 1 LSB

• Response time: 0.5 Seconds

• Ignition peak voltage range: 0 to 49.9 KVolt

• Antenna: Flexible with swivel capacitive sensor pick up

• Secondary ignition pick up: Capacitive sensor

• Spark Ignition System: Distributor,  Magneto and D.I.S.

• Power Source: One standard 9 Volt alkaline battery type NEDA 1604 IEC 6F 22

• Battery life: Approx. 25 hours of operation

• Power Saving: Auto power off after approximately 1 min. of inactivity

• Physical dimensions :  6" (H) x 4" (W)x 1.5" (D) (158 x 100 X 37 mm) - including holster but excluding antenna

• Weight: Approximately 11.8 Oz ( 335 g) Including battery

Electrical Specifications

• Maximum spark plug wire voltage (Through capacitive pickup only): 49.9 KVolt

For use in:

• Automobiles

• Trucks

• Boats

• High performance racing cars

• Motorcycles

• Skidoos

• Snow mobiles

• Lawnmowers

• Chainsaw

• Power generators

• Any engine equipped with spark plug ignition systems

TA100 Includes:

• TA100

• Protective rubber holster

• Hard padded case for carrying and storage

• 9 Volt alkaline battery

• User's Manual

Home  |  Products  |  Int'l Distributors  |  USA Distributors  |  Warranty  |  Contact us